Slide The world’s first photopolymer pack and the most efficient way to make polymer stamps. Clear Stamps imagepac superclear

Slide What is imagepac superclear? Buy Now













It is a simple idea that makes such a big difference. Using only the resin you want, pre-poured and optimized in a package just right for your application. It eliminates numerous steps from the traditional stamp making process.
Currently Shipping From UK imagepac superclear is pre-packaged 50 durometer photopolymer in a sachet. One side of the sachet is rigid, aiding handing during processing and the other is flexible, delivering excellent imaging.
Both sides of the imagepac superlcear plastic pouch are removable. This provides a naturally sticky back for the stamp allowing easy repositioning on an acrylic block or attaching to the base of a self inker.
Benefits over pouring photopolymer imagepac superclear is ideally suited for making craft stamps or for business stamp applications where you want to mask to produce large numbers of the same sized pre-cut stamps.
Packing Specifications Processing Instructions Recommended use A3- 306 x 436mm | 301 x 431mm
A4- 217 x 301mm | 212 x 301mm
A5- 217 x 158mm | 212 x 155mm
A6- 107 x 140mm | 104 x 137mm
A7- 107 x 74mm | 104 x 71mm
A8- 58 x 69mm | 53 x 63mm
Polymer Specifications No pouring resin

No mess

No bubbles

No laying of film, tape or pouring resin, saving over 10 minutes per plate. Typically 30% less waste.

Reduced stock, carrying only one item not four.

Easier to use, can delegate process.
Ink compatibility Water, oil and glycol based.
Inner Seal | Sachet Size Sachet Sizes Hardness: 53 Shore A (51 to 56)
Viscosity: 15,000 cps (12,000 – 17,000)
Colours: Non-yellowing clear
Storage: 10-50°C
Typical Plate Properties Plate thickness: 2.55mm or 3.2mm
Fine line min: 0.152mm (0.006”)
Isolated dot min: 0.254mm (0.010”)
Tone range: 2-95%
Line screen max: 100dpi
A3, A4 & A6 packed in 5’s
A5 & A7 packed in 10’s