Photocentric Innovator in Photopolymer, 3D Printing

UV DLP Poliglass Resin

$112.00

When it comes to glass resin, Photocentric’s UV DLP Poliglass resin has been formulated to resemble glass. Objects printed in Poliglass have a smooth surface finish and high transparency mimicking glass objects. In order to achieve a glossy surface finish when 3D printing, we recommend the application of a clear lacquer spray. However, Poliglass has been specifically developed to allow the fabrication of extremely clear glass-like objects. Parts 3D printed with Poliglass display high accuracy and minimal shrinkage, allowing for the production of highly accurate clear models.

15 in stock

1Kg

SKU: DLPPGCL01 Categories: , , , Tag:
Best Used for:

• Glass like
• Transparent
• Smooth surface finish

Compatible Printers:

UV DLP and UV LCD Printers such as MoonRay, Asiga, Envisontec, Flashforge, Anycubic, Wanhao, Phrozen, Sparkmaker, Kudo Bean and more.

Properties

UV DLP Poliglass Resin

Tensile Properties
Tensile Strength *
Elongation at break *
40 MPa
4%
ASTM D638
ASTM D638
General Properties
Hardness *
Heat Deflection Temperature *
Viscosity
Density
Storage
Colour
85 Shore D
60 °C
150 cPs
1.09 g/cm3
10<T>50°C
Clear
ASTM D2240
ASTM D648 (0.455 MPa)
At 25°C Brookfield spindle 3
* Post cured for 1hr at 60°C in Cure L2

Properties

UV DLP Poliglass Resin

Tensile Properties
Tensile Strength *
40 MPa
ASTM D638

 

Elongation at break *
4%
ASTM D638
General Properties
Hardness *
85 Shore D
ASTM D2240

 

Heat Deflection Temperature *
60 °C
ASTM D648 (0.455 MPa)

 

Viscosity
150 cPs
At 25°C Brookfield spindle 3

 

Density
1.09 g/cm3

 

Storage
10<T>50°C

 

Colour
Clear
* Post cured for 1hr at 60°C in Cure L2

 

Glossary of Key Terms
Tensile strength: Ability for an object to withstand pulling (tensile) force. Measured in units of force per cross-sectional area.

% elongation: How much an object can be stretched from its original shape.

Young’s Modulus: How much force is needed to stretch an object.

Flexural Strength: Ability to resist deformation under load.

Flexural Modulus: Measurement of an objects resistance to bend when force is applied (bend modulus).

HDT: Temperature at which a plastic deforms under heat.

Reviews

    Be the first to review “UV DLP Poliglass Resin”

    Your email address will not be published.