Daylight Magna Concept Resin
$420.00
Bring your model figurines and other designs to life with the Magna Concept Green resin. Print jewelry prototypes or detailed figurines with high strength, durability, and most importantly high accuracy with finished smooth surfaces. Figurine prints can be shown as is or easily painted by airbrush.
5Kg
Best used for:
• Rigid and accurate prototypes
• Intricate models and figurines
Compatible printers:
LC Magna (Not suitable for UV 3D printers)
Unique features:
• High tensile modulus
• High definition
• Smooth surface finish, allowing for a variety
of primer paints to be applied
Properties
Tensile Properties
Tensile Modulus *
Ultimate Tensile Strength *
Elongation at break *
2810 MPa
61 MPa
3.7%
ASTM D638
ASTM D638
ASTM D638
Flexural Properties
Flexural Strength *
Flexural Modulus *
87 MPa
2060 MPa
ASTM D792
ASTM D792
Impact Properties
Impact Strength Notched Izod *
Impact Strength Notched Izod *
2.5 kJ/m2
19.5 J/m
ISO 180
ASTM D256
General Properties
Hardness *
Heat Deflection Temperature *
Viscosity
Density
Storage
Colour
92 Shore D
185 °F
690 cPs
1.10 g/cm3
10<T>50°C
Green
ASTM D2240
ASTM D648 (0.455 MPa)
At 25°C Brookfield spindle 3
*Mechanical properties stated based on fully cured material.
Best used for:
• Rigid and accurate prototypes
• Intricate models and figurines
Compatible printers:
LC Magna (Not suitable for UV 3D printers)
Unique features:
• High tensile modulus
• High definition
• Smooth surface finish, allowing for a variety
of primer paints to be applied
Properties
Tensile Properties
Tensile Modulus *
2810 MPa *
ASTM D638
61 MPa
ASTM D638
Elongation at break *
3.7%
ASTM D638
Flexural Properties
Flexural Strength *
87 MPa
ASTM D792
Flexural Modulus *
2060 MPa
ASTM D792
Impact Properties
Impact Strength Notched Izod *
Impact Strength Notched Izod *
2.5 kJ/m2
ISO 180
19.5 J/m
ASTM D256
General Properties
Hardness *
92 Shore D
ASTM D2240
Heat Deflection Temperature *
185 °F
ASTM D648 (0.455 MPa)
Viscosity
690 cPs
At 25°C Brookfield spindle 3
Density
1.10 g/cm3
Storage
10<T>50°C
Colour
Green
* Mechanical properties stated based on fully cured material.
Glossary of Key Terms
Tensile strength: Ability for an object to withstand pulling (tensile) force. Measured in units of force per cross-sectional area.
% elongation: How much an object can be stretched from its original shape.
Young’s Modulus: How much force is needed to stretch an object.
Flexural Strength: Ability to resist deformation under load.
Flexural Modulus: Measurement of an objects resistance to bend when force is applied (bend modulus).
HDT: Temperature at which a plastic deforms under heat.
Reviews