$38.50 – $77.00
Glass-like prints with a crisp finish are obtained when using our Hard 3D Resin. Prints will retain their shape under stretch and compression whilst displaying a high stiffness and high hardness. When using our Hard Resin, you’ll 3D print objects that behave like commercial ABS.
- Low shrinkage
- Low Viscosity
LC HR2, LC HR, LC 10″
Score out of 100 when compared to other resins from our range.
Hover over the properties to understand their meaning.
Score out of 100 when compared to other resins from our range
Daylight Dental Model
Daylight High Tensile
Glossary of Key Terms
Tensile strength: Ability for an object to withstand pulling (tensile) force. Measured in units of force per cross-sectional area.
% elongation: How much an object can be stretched from its original shape.
Young’s Modulus: How much force is needed to stretch an object.
Flexural Strength: Ability to resist deformation under load.
Flexural Modulus: Measurement of an objects resistance to bend when force is applied (bend modulus).
HDT: Temperature at which a plastic deforms under heat.