Photocentric Innovator in Photopolymer, 3D Printing

What is imagepac superclear?

The world’s first photopolymer pack and the most efficient way to make polymer stamps. imagepac superclear is pre-packaged 50 durometer photopolymer in a sachet. One side of the sachet is rigid, aiding handing during processing and the other is flexible, delivering excellent imaging.

Benefits over pouring photopolymer

It is a simple idea that makes such a big difference. Using only the resin you want, pre-poured and optimized in a package just right for your application. It eliminates numerous steps from the traditional stamp making process.

  • No pouring resin

  • No mess

  • No bubbles

  • No laying of film, tape or pouring resin, saving over 10 minutes per plate. Typically 30% less waste.

  • Reduces your inventory

  • Easier to use, can delegate process.


Both sides of the imagepac superlcear plastic pouch are removeable. This provides a naturally sticky back for the stamp allowing easy repostioning on an acrylic block or attaching to the base of a self inker.

imagepac, Plate making, Stampmaking

Recommended use

imagepac superclear is ideally suited for making craft stamps or for business stamp applications where you want to mask to produce large numbers of the same sized pre-cut stamps.

Ink compatibility

Water, oil and glycol based.

Sachet Sizes

Inner Seal  | Sachet Size

A3- 306 x 436mm | 301 x 431mm
A4- 217 x 301mm | 212 x 301mm
A6- 107 x 140mm | 104 x 137mm
A7- 107 x 74mm   | 104 x 71mm

A3, A4 & A6 packed in 5’s  |   A7 packed in 10’s


Hardness: 53 Shore A (51 to 56)
Viscosity: 15,000 cps (12,000 – 17,000)
Colours: Non-yellowing clear
Storage: 10-50°C

Typical Plate Properties

Plate thickness: 2.55mm or 3.2mm
Fine line min: 0.152mm (0.006”)
Isolated dot min: 0.254mm (0.010”)
Tone range: 2-95%
Line screen max: 100dpi


Currently Shipping from UK